QX56 RWD V8-5.6L (VK56DE) (2006)
Wiper Motor: Service and Repair
Rear Wiper Motor
Rear Wiper Motor
REMOVAL AND INSTALLATION
REMOVAL
1. Remove wiper arm.
2. Remove pivot cap.
3. Remove back door lock assembly.
4. Disconnect rear wiper motor connector.
5. Remove rear wiper motor bolts, and remove rear wiper motor.
INSTALLATION
CAUTION: Do not drop the wiper motor or cause it to contact other parts.
1. Install rear wiper motor to the vehicle.
2. Connect rear wiper motor connector.
3. Install back door lock assembly.
4. Install pivot cap.
5. Install wiper arm.