i-290 2WD L4-2.9L (2008)
2. Starting at the upper rear corner, press the rear door opening weatherstrip (2) onto the pinchweld flange (1) until it is fully seated.
3. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement (See: Interior Moulding / Trim/Trim Panel/Service
and Repair/Center Pillar Lower Trim Panel Replacement) .
4. Pull the cord (3) on the rear door opening weatherstrip ensuring the weatherstrip lip overlaps the interior trim panels and headliner.
5. Close the rear door.