i-290 2WD L4-2.9L (2008)
*
Seats and carpeting
8. Remove the inside rear view mirror (4) . Refer to Inside Rearview Mirror Replacement (See: Body and Frame/Mirrors/Service and Repair/Inside
Rearview Mirror Replacement) .
Important: The upper window reveal molding fills the cavities between the body and window.
If the reveal molding is stretched or damaged, it cannot be reused. It must be replaced.
9. Remove the upper window reveal molding (1). If the upper window reveal molding will not release, it must be replaced.
Important: The window lower supports (1) have molded in locks with an urethane adhesive strip (2) on the back side. Once the window
lower stop have been removed they must be replaced.
10. Remove the window lower supports (1) by using a flat-bladed tool, lightly prying upward in the middle until it releases.
Important: Keep the cutting edge of the tool against the window.