Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
4. Install the Spring pin.
-
Carefully install spring pin with hammer to avoid damage to valve body etc.
3. Install the Wiring harness.
-
Connect wiring harness to solenoids and main case 4 pin connector.
2. Install the Oil filter.
-
Install oil filter with new gasket, three 13 mm screws.
Torque: Oil Filter 13 mm Screws - 20 N.m (15 lb-ft.)
1. Install the Main case oil pan.
-
Install magnet, main case oil pan with new gasket, sixteen 10 mm screws.
Torque: Main Case Oil Pan 10 mm Screws - 11 N.m (96 lb-in.)
-
Fill transmission through the overfill screw hole of oil pan, using ATF DEXRON(R)-III.
-
Connect negative (-) battery cable.