Majestic L6-3.6L (1989)
2.
Pull back the rubber protective cover over the pivot pin (Illustration 2).
3.
Remove one of the spring washers securing the pivot pin in the door handle assembly.
4.
Remove the pivot pin and return spring.
5.
Remove the rubber cover from the flap handle arm and then remove the flap handle.
6.
Insert the new flap handle and place the rubber cover over the arm.
7.
Insert the pivot pin with the return spring and secure the pin with the spring washer.
8.
Position the protective cover over the pivot pin.
9.
Reinstall door handle assembly.
PARTS INFORMATION:
