jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

A/T - MIL ON, Goes Into Limp Mode|Page 3456 > < Transmission Control Module|Page 3449
Page 1
background image

Downshift Switch: Technical Service Bulletins
A/T - MIL ON, Goes Into Limp Mode

44-15

Transmission - Kickdown Switch Operation

MODEL: 90-91 MY Sedan

DATE: 1/92

ISSUE:

Electronic transmission goes into "Limp Home" mode (illuminating the transmission warning light) after operation of the kickdown switch. This will
occur after the kickdown switch is depressed and the throttle is allowed to travel past the specified "Wide Open Throttle" stop.

ACTION:

If this problem occurs, the following throttle linkage adjustments must be performed:

1.

Install tool JD 131 on the throttle stop plate. Align the pointer to the "I" on the bellcrank, (Fig. 1). Then slide the pointer back to clear the return
spring.

2.

Loosen the full throttle stop lock nut, (Fig. 2).

A/T - MIL ON, Goes Into Limp Mode|Page 3456 > < Transmission Control Module|Page 3449