S-Type (X200) V8-4.0L (AJ28) (2001)
Components
Harness In-line Connectors And Junction Connectors
Grounds
This information is included to assist the user in identifying and locating components, connectors and grounds.
When network data is required for the understanding of a particular circuit, the user is directed to the Abbreviations and Acronyms See:
Diagrams/Diagram Information and Instructions/Abbreviations and Acronyms or SCP Messages. See: Diagrams/Diagram Information and
Instructions/SCP Messages
Where circuits include a Control Module, Pin Out information is provided with values for active and inactive states. The values listed are approximately
those that can be expected at the control module connector pins with all circuit connections made and all components connected and fitted. Active means
a load is applied or a switch is ON; inactive means a load is not applied or a switch is OFF. This information is provided to assist the user in
understanding circuit operation and should be used FOR REFERENCE ONLY.
Symbols and Codes
Symbols and Codes
NOTE: In the examples, an 'X' is used where a number would appear on the actual figure.
Reference Symbols
Control Module Pin Symbols