S-Type (X200) V8-4.0L (AJ28) (2001)
Hood: Service and Repair
Hood (76.16.01)
Removal
1. Remove the hood insulation.
2. Detach the windshield washer supply hose.
3. Guide the windshield washer supply hose through the hood aperture.
4. NOTE: Left-hand shown, right-hand similar.
Remove both hood struts.
5. CAUTION: Make sure the hood does not contact the vehicle body while removing. Failure to carry out these instructions may cause
damage to the vehicle.
NOTE: Left-hand shown, right-hand similar.
Remove the hood.
-
Remove the hood retaining bolts.