S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-983003.png)
2. NOTE:
-
Make sure the piston location mark is in the correct position so that the locator pin on the pad backplate locates correctly into the piston.
-
Caliper guide pin bolts must be replaced.
Install the caliper.
3. Install the new brake hose.
4. Remove the brake hold down tool.
5. Bleed the brake system. For additional information, refer to Brake Bleeding.
6. Install the wheel.