S-Type (X200) V8-4.0L (AJ28) (2001)
![background image](/jaguar/s-type_(x200)/v8-4.0l_(aj28)/Page-370005.png)
3. Apply RTV sealant WSS-M4G320-A3 to two places on the joint between the front of the valve cover and the cylinder head.
^
The application of sealant must be 3 mm diameter by 12 mm long. Install the valve cover immediately after applying the sealant.
^
The cover should be fitted directly to the head without smearing the sealant or the seals.
4. Install the valve cover.
5. Tighten the valve cover screws.