S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-889004.png)
12. Connect the selector cable.
^
Do not tighten the selector lever lock nut.
13. Move the selector lever to position "D".
^
Hold the selector lever applying light pressure and finger tighten the rear lock nut, then finger tighten the front lock nut.
14. Move the selector lever to different gear lever positions
^
When "D" is selected make sure it sits as close as possible to the "D" and "4" position in each corner.
15. Tighten the selector lever lock nut.
16. Install the center console upper section.