S-Type (X200) V8-4.0L (AJ28) (2001)
![background image](/jaguar/s-type_(x200)/v8-4.0l_(aj28)/Page-937004.png)
2. Install the output shaft flange.
3. NOTE: Apply Loctite 243 to the retaining nut.
Install the output shaft nut.
^
Tighten to 120 Nm (89 ft. lbs.).
4. Install the transmission flexible joint.
2. Install the output shaft flange.
3. NOTE: Apply Loctite 243 to the retaining nut.
Install the output shaft nut.
^
Tighten to 120 Nm (89 ft. lbs.).
4. Install the transmission flexible joint.