S-Type (X200) V8-4.0L (AJ28) (2001)
13. Apply suitable tape around windshield aperture to protect paintwork.
14. Apply suitable protective tape around leading edge of headlining.
15. Prepare cheese wire and cutting handle.
-
Position cutting handle central tube fully upwards in handle.
-
Cut a suitable length of cheese wire and pass one end through handle tube and locating aperture.
-
Move cutting handle central tube downwards to secure cheese wire.
16. Using a suitable long bladed tool, penetrate Betaseal approximately 150 mm from the top of one A pillar.