S-Type (X200) V8-4.0L (AJ28) (2001)
23. Exercising care not damage paintwork, use vibroknife to remove residual sealant from body flange.
24. Remove protective cloth from fascia.
25. Remove protective tape from windshield aperture.
Installation
1. NOTE: If original windshield is to be installed remove the residual sealant from glass mating surface using suitable scraper.
Install the upper and lower windshield spacers to the aperture.
1. Install the alignment pegs to the upper aperture.
2. Install the seating pegs to the upper and lower aperture.
2. Thoroughly clean glass surface using Betawipe spirit.