S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-1647024.png)
Carefully install the windshield in the aperture. Aligning the glass with the body markings and press firmly into place.
8. Remove the lifting handles.
9. Remove the protective tape from the leading edge of the headlining.
10. NOTE: Left-hand electrical connector shown, right-hand similar.
Reconnect the heated windscreen electrical connector.
11. Install the A-pillar trims.
12. Install the interior mirror.
13. Install the lower A-pillar drainage channels.
