S-Type (X200) V8-4.2L (2005)
All vehicles
6. NOTE: Left-hand shown, right-hand similar.
Remove the left-hand front bumper cover retaining bolt.
7. Lower the vehicle.
Vehicles with headlamp washers
8. NOTE: Right-hand shown, left-hand similar.
Reposition the headlamp washer jet.
-
Apply suitable tape to the bumper cover to prevent damage to the bumper cover.
9. NOTE: Right-hand shown, left-hand similar.
Remove the headlamp washer jet trim.
All vehicles
10. NOTE: Left-hand shown, right-hand similar.
Remove the bumper cover left retaining bolt.