S-Type (X200) V8-4.2L (2005)
28. Detach the parking aid wiring harness from the rear bumper cover. (if equipped).
Installation
Vehicles built up to 01/2004
1. To install, reverse the removal procedure.
-
Tighten to 7 Nm.
2. NOTE: Left-hand shown, right-hand similar.
-
Tighten to 7 Nm.
3. Tighten to 7 Nm.
Vehicles built 0/2004 onwards
4. To install, reverse the removal procedure.
-
Tighten to 5 Nm.