S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1583001.png)
Rear Bumper Reinforcement: Service and Repair
Rear Bumper (76.22.27)
Removal
1. Remove the rear bumper cover.
2. NOTE: Left-hand shown, right-hand similar.
Detach the exhaust hanger insulator.
3. NOTE: Left-hand shown, right-hand similar.
Remove the exhaust hanger.
4. Remove the rear bumper.
Installation
1. To install, reverse the removal procedure.
-
Tighten to 18 Nm.
