S-Type (X200) V8-4.2L (2005)
Front Door Window Regulator: Removal and Replacement
Front Door Window Regulator and Motor (86.25.04)
Removal
1. Remove the front door window glass.
2. Detach the front door window regulator and motor.
3. Detach the front door window regulator and motor.
4. Remove the front door window regulator and motor.
-
Disconnect the front door window regulator and motor electrical connector.
Installation
1. NOTE: Make sure the cable from the motor is the outermost cable.
To install, reverse the removal procedure.
2. Tighten to 6 Nm.