S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1625001.png)
Hood: Adjustments
Hood Alignment (76.16.02)
1. NOTE: Left-hand shown, right-hand similar.
Remove both hood latches.
2. NOTE: Left-hand shown, right-hand similar.
Remove both hood struts.
3. NOTE: Left-hand shown, right-hand similar.
Loosen both hood hinge retaining bolts.
4. Pull up/push down on the hood.
5. NOTE: Make sure the spacing between the grille to hood, headlamps to hood and fenders to hood are equal.
Set the alignment to nominal.
6. Tighten the hood hinge retaining bolts.
-
Tighten to 25 Nm.
