S-Type (X200) V8-4.2L (2005)
Install the special tool.
3. NOTE: Left-hand shown, right-hand similar.
Install the front subframe rear retaining bolts.
-
Tighten to 80 Nm + 240 degrees.
4. Remove the special tool.
5. Install the front subframe front retaining bolt.
-
Tighten to 150 Nm + 240 degrees.
6. Remove the special tool.
7. Install the front subframe front retaining bolt.
-
Tighten to 150 Nm + 240 degrees.