S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1653003.png)
4. Detach the front safety belt shoulder height adjuster.
5. Remove the B-pillar upper trim panel.
Installation
1. WARNING: Make sure the side airbag bracket located above the B-pillar upper trim is located into the B-pillar trim housing, as this
retains the trim in the event of side airbag deployment.
To install, reverse the removal procedure.
-
Tighten to 40 Nm.
C-Pillar Trim Panel
C-Pillar Trim Panel (76.13.73)
Removal
1. Remove the rear seat bolster.
2. Detach the rear safety belt.
