S-Type (X200) V8-4.2L (2005)
4. Adjust the rear glass edge to between flush and 1 mm (0.04 in) low.
5. NOTE: Left-hand, shown right-hand similar.
Tighten to 4 Nm.
6. NOTE: Left-hand, shown right-hand similar.
Install the sight shields.
4. Adjust the rear glass edge to between flush and 1 mm (0.04 in) low.
5. NOTE: Left-hand, shown right-hand similar.
Tighten to 4 Nm.
6. NOTE: Left-hand, shown right-hand similar.
Install the sight shields.