S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1716002.png)
6. Detach the front seat harness.
NOTE: Left-hand shown, right-hand similar.
7. Remove the front seat recliner motor trim cover.
8. Remove the front seat backrest.
-
Remove the front seat backrest retaining bolts.
Installation
NOTE:
-
Left-hand shown, right-hand similar.
-
Install new lumbar motor retaining clips.
1. To install, reverse the removal procedure.
-
Tighten to 35 Nm.
