S-Type (X200) V8-4.2L (2005)
NOTE: Left-hand shown, right-hand similar.
7. Remove the front seat recliner motor trim cover.
8. Remove the front seat backrest.
-
Remove the front seat backrest retaining bolts.
Installation
NOTE:
-
Left-hand shown, right-hand similar.
-
Install new lumbar motor retaining clips.
1. To install, reverse the removal procedure.
-
Tighten to 35 Nm.
Front Seat Backrest - Vehicles Built Up to: 01/2004
Front Seat Backrest - Vehicles Built Up To: 01/2004
Removal
CAUTION:
-
Do not remove or carry out any repairs to the anti-whiplash system (AWS) on the front seat back.
-
In the event of the AWS operating, there are no serviceable components.
1. Remove the front seat recliner motor.
CAUTION: Make sure that all trim panels are protected when the seat is removed from the vehicle.