S-Type (X200) V8-4.2L (2005)
5. Remove the front seat cushion cover.
-
Cut the hog rings.
Installation
1. NOTE: Install new hog rings. Use hog ring pliers to close the hog rings. Do not use any other tool. The hog rings must be closed to overlap as
illustrated.
To install, reverse the removal procedure.
Rear Seat Backrest Cover
Rear Seat Backrest Cover (76.70.48)
Removal
1. Remove both rear seat bolsters.
2. Remove the rear seat backrest.
3. CAUTION: Make sure that all trim panels are protected when the seat backrest is removed from the vehicle.
Detach the rear seat backrest cover.