S-Type (X200) V8-4.2L (2005)
Removal
1. Detach the center rear safety belt.
2. Detach the rear seat cushion.
1. Release the rear seat cushion retaining clips.
2. Detach the rear seat cushion.
3. Remove the rear seat cushion.
1. Guide the safety belt buckles through the rear seat cushion aperture.
2. Remove the rear seat cushion.
Installation
1. To install, reverse the removal procedure.
Front Seat Backrest Cover Installation
Front Seat Backrest Cover (76.70.15)
Installation
1. To install, reverse the removal procedure.
NOTE: Install new hog rings. Use hog ring pliers to close the hog rings. Do not use any other tool. The hog rings must be closed to overlap as
illustrated.
2. Tighten to 7 Nm.