S-Type (X200) V8-4.2L (2005)
6. Fill up the brake master cylinder reservoir to the MAX mark.
7. Install the brake master cylinder reservoir filler cap.
Additional Procedure to Bleed New Calipers with Integral Park Brake Mechanism
NOTE: Due to the complexity of the fluid path within the integral parking brake calipers, it may be difficult to achieve a satisfactory result using the
procedure above when new calipers have been installed.
1. Using the Jaguar approved diagnostic system, put the parking brake system into service mode.
2. Remove both rear wheels and tires.
3. Bleed the braking system.
4. Disconnect the parking brake cable.
^
Release the tension.
^
Disconnect the parking brake cable.
5. Detach the parking brake cable.