S-Type (X200) V8-4.2L (2005)
2. Attach the parking brake cable.
7. Install both rear wheels and tires.
Brembo Brakes
Brake Pads Vehicles With: Brembo Brakes
Removal
1. Remove both rear wheels and tires.
2. Remove the brake pads.
1. Remove the brake pad retaining pins.
2. Remove the brake pad anti-rattle spring plate.
3. Remove the brake pads.
Installation
1. WARNING: DO NOT USE A COMPRESSED AIR TO DISPERSE BRAKE DUST INTO THE ATMOSPHERE.
^
CAUTION: If the pistons are pushed back into the housing, brake fluid will be forced back into the brake fluid reservoir.
^
CAUTION: Make sure the brake disc faces are clean before installation.
^
CAUTION: Brake pads must always be replaced in axle sets.
^
CAUTION: Make sure the brake pads are installed with the direction arrow facing downwards.
To install, reverse the removal procedure.
^
Using a suitable tool, fully retract the brake caliper pistons.