S-Type (X200) V8-4.2L (2005)
7. CAUTION: Remove brake fluid spillage immediately from paint work, with clean water.
Check brake fluid level.
^
Check brake fluid level is at the maximum mark.
^
Remove cloth.
^
Fit cap.
8. Remove paint work protection covers, and close engine compartment.
9. Start the engine and repeatedly press the brake pedal until brake pressure is evident.
Brake Pads - Vehicles With: High Performance Brakes, VIN Range: N52207>N99999
Brake Pads - Vehicles With: High Performance Brakes, VIN Range: N52207>N99999 (70.40.02)
Removal
1. Remove both front wheels and tires.
2. NOTE: Left-hand shown, right-hand similar.
Remove the anti-rattle spring.
3. NOTE: Left-hand shown, right-hand similar.
Remove the brake caliper retaining bolt dust covers.