S-Type (X200) V8-4.2L (2005)
1. CAUTION: Brake discs must always be replaced in axle sets.
NOTE: Left-hand shown, right-hand similar.
To install, reverse the removal procedure.
^
Tighten to 115 Nm.
Brake Disc Shield - Vehicles With: Standard Brakes
Brake Disc Shield - Vehicles With: Standard Brakes (70.10.18)
Removal
1. Remove the front brake disc.
2. Remove the brake disc shield.
^
Remove and discard the brake disc shield retaining rivets.
Installation
1. To install, reverse the removal procedure.
^
Install new brake disc shield retaining rivets.
Brake Disc Shield - Vehicles With: High Performance Brakes
Brake Disc Shield - Vehicles With: High Performance Brakes (70.10.18)
Removal
1. Remove the wheel bearing and wheel hub.
2. Remove the brake disc shield.
^
Remove and discard the brake disc shield retaining rivets.
Installation
1. To install, reverse the removal procedure.
^
Install new brake disc shield retaining rivets.