S-Type (X200) V8-4.2L (2005)
1. WARNING: Do not use compressed air to disperse brake dust into the atmosphere.
CAUTION: Brake discs must always be replaced in axle sets.
CAUTION: Make sure the brake disc faces are clean before installation.
NOTE: Left-hand shown, right-hand similar.
To install, reverse the removal procedure.
^
Tighten to 103 Nm.
Brake Disc Shield
Brake Disc Shield (70.10.19)
Removal
1. Remove the brake disc.
2. Remove the brake disc shield.
^
Drill out the rivets.
Installation
1. To install, reverse the removal procedure.
^
Install new rivets.