S-Type (X200) V8-4.2L (2005)
5. NOTE: Left-hand shown, right-hand similar.
Remove the brake caliper retaining bolts.
6. NOTE: Left-hand shown, right-hand similar.
Remove the brake caliper.
7. CAUTION: Do not allow the brake caliper to hang on the hydraulic hose, as this will damage the hose. Failure to follow this instruction will
result in damage to the hose.
NOTE: Left-hand shown, right-hand similar.
Remove the brake pad from the caliper piston.
8. NOTE: Left-hand shown, right-hand similar. Remove the brake pad.
Installation