S-Type (X200) V8-4.2L (2005)
CAUTION: If brake fluid comes into contact with the paintwork, the affected area must be immediately washed down with cold water.
NOTE: To prevent the loss of brake fluid, apply the brake pedal hold-down tool and adjust to hold the brake pedal down 40 mm (1.6 inch).
NOTE: Cap the brake hose to prevent loss of fluid and dirt ingress.
Detach the brake hose.
^
Remove and discard the sealing washers.
3. Remove the brake caliper.
^
Remove and discard the brake caliper retaining bolts.
Installation
1. Install the brake caliper.
^
Install new brake caliper retaining bolts.
^
Tighten to 70 Nm.
2. Attach the brake hose.
^
Install new sealing washers.
^
Tighten to 35 Nm.
3. Remove the brake pedal hold-down tool.
4. Install the brake pads.
5. Bleed the brake system.
Brake Caliper - VIN Range: N52207->N99999
Brake Caliper - VIN Range: N52207->N99999 (70.55.03)