S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1147001.png)
Electronic Brake Control Module: Service and Repair
Anti-Lock Brake System (ABS) Module
Anti-Lock Brake System (ABS) Module (70.60.02)
Removal
1. Disconnect the battery ground cable.
2. Disconnect the hydraulic control unit (HCU) electrical connector.
3. Detach the engine compartment battery junction box.
4. Remove the windshield washer reservoir.
5. Remove the anti-lock brake system (ABS) module.
Installation
1. To install, reverse the removal procedure.
