S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-519005.png)
13. Remove the cooling module retaining bolt.
^
Secure the supercharger cooling radiator, condenser core and engine oil cooler using suitable retaining straps.
Vehicles without supercharger
14. NOTE: Left-hand shown, right-hand similar.
Detach the power steering oil cooler.
15. NOTE: Left-hand shown, right-hand similar.
Remove the condenser core retaining stud.
^
Secure the condenser core and PAS cooler using suitable retaining straps.
All vehicles
16. Lower the vehicle.
17. CAUTION: Make sure that the radiator is not damaged when removed.
Remove the radiator.
Installation
All vehicles
1. CAUTION: Make sure that the radiator is not damaged when installed.
