S-Type (X200) V8-4.2L (2005)
Camshaft: Service and Repair
Camshafts LH
Camshafts LH (12.13.19)
Removal
1. Remove the timing drive components.
2. Remove the camshaft bearing caps evenly.
3. Remove the camshafts.
Installation
1. NOTE: Lubricate the camshafts and the camshaft bearing caps with oil meeting Jaguar specification prior to installation.
Install the camshafts.
2. CAUTION: Do not install the cylinder head camshaft journal thrust caps until the camshaft journal caps are installed or damage to the thrust caps
may occur.
Install the camshaft bearing caps in their original position.
^
Install the camshaft bearing cap retaining bolts evenly.
^
Tighten the retaining bolts in the sequence shown to 10 Nm.