S-Type (X200) V8-4.2L (2005)
9. CAUTION: Do not tighten the camshaft sprocket retaining bolts.
CAUTION: Make sure the secondary timing chain and camshaft sprockets are free to rotate.
Install the camshaft sprockets.
^
Install the secondary timing chain tensioner and secondary timing chain to the camshaft sprockets.
10. Install the secondary timing chain tensioner retaining bolts.
^
Tighten to 12 Nm.
11. Release the tension in the right-hand timing chain tensioner.
^
Remove the retaining tool.
12. Install the timing chain tensioning tool 303-532 to the exhaust camshaft sprocket.
^
Reposition the camshaft sprockets for the most advantageous position for use of the tool.
13. CAUTION: Make sure the timing chain slack is on the tensioned side of the timing chain.
Install the primary timing chain.
^
Install the primary chain over the crankshaft sprocket and the intake sprocket.