S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-392010.png)
24. Install the right-hand variable camshaft timing oil control unit housing.
^
Install new O-ring seals.
^
Tighten to 22 Nm.
25. Raise the vehicle.
26. Remove the special tool.
27. Install the CKP sensor.
^
Tighten to 10 Nm.
28. Connect the CKP sensor electrical connector.
29. Lower the vehicle.
30. Carry out the valve clearance check.
