S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-417005.png)
7. Connect the fuel line.
^
Attach the fuel line retaining clip.
^
Install new O-ring seals.
Vehicles without supercharger
1. Attach the engine wiring harness.
^
Connect the variable camshaft timing (VCT) oil control solenoid electrical connector.
^
Attach the engine wiring harness.
2. Install the left-hand engine cover bracket.
^
Tighten to 6 Nm.
All vehicles
1. Install the oil level indicator and tube.
^
Install a new O-ring seal.
^
Tighten to 6 Nm.
