S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-418005.png)
6. Connect the fuel line.
^
Attach the fuel line retaining clip.
^
Install new O-ring seals.
7. NOTE: Right-hand shown, left-hand similar.
Attach the engine wiring harness.
8. Attach the engine wiring harness.
^
Connect the VCT oil control solenoid electrical connector.
^
Attach the engine wiring harness.
9. NOTE: Vehicles with supercharger shown, vehicles without supercharger similar.
Attach the engine cover bracket.
^
Tighten to 6 Nm.
