S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-419010.png)
All vehicles
1. NOTE: Install the valve cover retaining bolts to their positions previously noted.
Install the valve cover retaining bolts.
^
Install new valve cover retaining bolt O-ring seals.
2. Install the valve cover.
^
Install new valve cover gaskets.
^
Complete the tightening sequence.
^
Tighten to 12 Nm.
3. Install the ignition coil-on-plugs.
^
Tighten to 5 Nm.
