S-Type (X200) V8-4.2L (2005)
11. Remove the valve cover assembly.
^
Remove and discard valve cover gaskets.
12. NOTE: On removal of the valve cover retaining bolts note their positions in the valve cover.
Remove the valve cover retaining bolts.
^
Remove and discard the valve cover retaining bolt O-ring seals.
Installation
1. NOTE: Install the valve cover retaining bolts to their positions previously noted.
Install the valve cover retaining bolts.
^
Install new valve cover retaining bolt O-ring seals.
2. Apply bead of silicone gasket sealant or equivalent meeting Jaguar specification on the two places where the cylinder head and front cover join.