S-Type (X200) V8-4.2L (2005)
4. Remove the ignition coil-on-plugs.
^
Remove the retaining bolts.
5. Remove the valve cover assembly.
^
Remove and discard valve cover gaskets.
6. NOTE: On removal of the valve cover retaining bolts note their positions in the valve cover.
Remove the valve cover retaining bolts.
^
Remove and discard the valve cover retaining bolt O-ring seals.
Installation
All vehicles
1. NOTE: Install the valve cover retaining bolts to their positions previously noted.
Install the valve cover retaining bolts.
^
Install new valve cover retaining bolt O-ring seals.