S-Type (X200) V8-4.2L (2005)
Oil Pan: Service and Repair
Oil Pan (12.60.44)
Removal
1. Remove the air deflector.
2. Drain the engine oil.
^
Place suitable container under the vehicle.
^
Remove the drain plug and drain the engine oil.
3. Remove the oil pan.
^
Remove and discard the gasket.
Installation
1. NOTE: Make sure all surfaces are clean.
Install the oil pan gasket to the oil pan body assembly.
2. Install the oil pan.
^
Install, but do not fully tighten the retaining bolts.
3. Tighten the oil pan bolts to the correct torque figure 12 Nm, in the sequence indicated.
^
A new oil pan is supplied with the drain plug installed. Check that the drain plug is tightened to 25 Nm.