S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-451010.png)
^
Remove the retaining tool.
23. CAUTION: While applying the opposing force to sprocket and chain, tighten the sprocket bolt.
Using the special tool, apply force to the tool in an anti-clockwise direction to tension the primary timing chain on its drive side.
^
Tighten to 120 Nm.
24. CAUTION: While applying the opposing force to sprocket and chain, tighten the sprocket bolt.
Using the special tool, apply force to the tool in an anti-clockwise direction.
^
Tighten to 120 Nm.
25. Remove the special tool from the right-hand cylinder head.
26. Remove the special tool from the left-hand cylinder head.
