S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-457003.png)
4. Reposition the nuts to hold the special tool against the crankshaft rear seal. Check that the crankshaft rear seal and the special tool are parallel to
the rear of the engine.
5. CAUTION: Alternate nut tightening to correctly seat the crankshaft rear seal.
Using the special tool, install the crankshaft rear seal.
6. Remove the special tool from the crankshaft.
^
Check that the seal is located correctly.
7. Install the flexplate.
