S-Type (X200) V8-4.2L (2005)
Receiver Dryer: Service and Repair
Desiccant Bag (82.17.03)
Installation
1. Add the correct amount of A/C refrigerant oil to the desiccant bag. Refrigerant Oil Adding
2. Install new desiccant bag O-ring seals.
-
Lubricate the new O-ring seals with A/C refrigerant oil.
3. Install the new desiccant bag.
-
Tighten to 8 Nm.
CAUTION: Do not leave the desiccant bag exposed to atmosphere for longer than five minutes.
NOTE: Un-cap the exposed ports.
4. Install the desiccant bag retaining bracket.
-
Tighten to 8 Nm.
5. Attach the power steering fluid cooler.
6. Clean off any oil residue that may contain A/C system flourescent dye.
7. Install the radiator lower cowl.