S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-708001.png)
Fuel Level Sensor: Service and Repair
Fuel Level Sender LH - VIN Range: N52048->N99999
Fuel Level Sender LH - 4.2L/2.5L/3.0L, VIN Range: N52048->N99999
Removal
WARNING:
-
Do not smoke or carry lighted tobacco or an open flame of any type when working on or near any fuel related components. Highly
flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
-
Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always
present and may ignite. Failure to follow these instructions may result in personal injury.
-
This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure to
follow these instructions may result in personal injury.
1. Remove the fuel transfer unit.
2. Remove the fuel level sender and harness.
-
Remove and discard the fuel level sender harness tie straps.
Installation
WARNING:
-
Do not smoke or carry lighted tobacco or an open flame of any type when working on or near any fuel related components. Highly
flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
-
Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always
present and may ignite. Failure to follow these instructions may result in personal injury.
-
This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure to
follow these instructions may result in personal injury.
1. To install, reverse the removal procedure.
