S-Type (X200) V8-4.2L (2005)
5. Loosen both catalytic converter retaining clamps.
6. Remove the front muffler and tail pipes.
CAUTION: Under no circumstances must the flexible coupling (or its fixings) be loosened or removed from the driveshaft
7. Detach the driveshaft from the rear drive axle flange.
-
Mark the position of the driveshaft in relation to the rear drive axle flange.
-
Mark the position of the balance nut in relation to the rear drive axle flange (if fitted).
-
Mark the position of each nut and bolt in relation to the rear drive axle flexible joint.
8. Remove both rear wheels and tires.
Vehicles without Brembo brakes
NOTE: Left-hand shown, right-hand similar.
1. Detach the brake caliper.
-
Remove and discard the brake caliper retaining bolts.
-
Detach the brake caliper.